A Baby Bear Hat

I found this adorable pattern for a baby bear hat on (where else) Pinterest.

I went ahead and made the hat according to the directions, but I didn't like that the back of the hat had a seam all the way down. For an older kid, or a baby not in a car seat, it would be no big deal. However, for a sensitive little newborn head, I wanted to eliminate the back seam as much as possible. So, I actually reworked the pattern. This was my third attempt, and I think it's adorable!

It's a little small on Micah here, but he was 6 months old when I did this, and it was for a newborn, so I think the size is just about perfect.

In order to eliminate the back seam, I had to add side seams. I don't think they detract too much from the cuteness, though! Plus, I was also able to eliminate some of the seam in the front.

Another project I've been working on lately are these embroidered felt heart magnets.

It's a fun little project that I can work on anytime and set down whenever I need to, so perfect for a mom with two kiddos.

And they make great gifts!

Love and Thread,

Leah Joy

A Mario Baby Quilt

This may be the coolest quilt I've made yet!

I found this amazing fabric for the back:

Closer view:

I bound the quilt in yellow, as it was the only non-white color that went with both the front and the back. It's a super cheerful border!

While the center section is all composed of 2" squares, I did use larger pieces of sky blue for the tops and sides. Once quilted, though, it looks much the same.

I found this quilt surprisingly soothing to piece and press. Even the back of the quilt top looked so tidy and neat.

This quilt is for my nephew, my brother's baby.

Love and 8-Bit,

Leah Joy

A Dinosaur Quilt for Micah

After making a quite intricate herringbone quilt for a cousin's baby, perhaps I might be expected to do something equally intricate (if not more so) for my own offspring. Nope. I went super easy-mode on this quilt for Micah. Partially because I was 8 months pregnant. Partially because I found some adorable prints that featured better in larger pieces.

The front of the quilt is all flannel. It's so soft and cozy!

I found the perfect binding fabric! It has all the main colors of the quilt in it.

I used this adorable regular cotton print for the back:

Love and Flannel,

Leah Joy

Herringbone Baby Quilt

This is a quilt I made this past winter for my cousin's baby.

I had so much fun picking out the fabric for this quilt.

I'm so pleased with how it turned out!

It was really fun to piece this quilt together and watch the pattern grow.

I even quilted it with the herringbone pattern, so I think the back looks just as cool as the front:

Love and Babies,

Leah Joy

Sewing Tutorial: Toddler Purse

A while back, Josephine grabbed my cross-body purse and put it on with the strap over her body. How about a gentle reminder that my kid is watching everything I do?! I decided I wanted to make her her own purse, so that we could both have one.

I looked for a quick tutorial for an easy (and reversible) purse, but couldn't find one, so this is either a really great and helpful tutorial, or so easy that no one else thought it worthwhile to write. :)

I made this with scraps and materials I already had.

Materials:

- 4 rectangles of fabric 5.5" by 6" (for the body - can be all the same, all different, or two of each like I did)

- one piece of fabric 2.5" by 27"*

- 2 bits of round elastic (a few inches each - length will depend on your toggle)

- toggle or button

*27" was the correct length for Josephine, but you may want it shorter or longer. I put the measuring tape on her how a purse strap would go, and then added an inch for seam allowances.

1. Press the strap piece in half, lengthwise, right sides together.

2. Stitch along the length with 1/4" seam allowance. My machine allows me to adjust the needle position. I've figured out that if I use the edge of the presser foot as a guide for my fabric, and have the needle position set to 2.5, I get a perfect 1/4" seam allowance.

3. Place two of the body pieces right sides together, and stitch along 3 edges (two 6" edges, and one 5.5" edge). Leave your needle down at the corners, lift your presser foot, rotate the fabric, and lower the presser foot to get crisp, square corners.

Another feature on my machine is the 'Needle Position' button. When activated, the stitching will automatically end with the needle down.

4. Repeat for the other two body pieces.  Now you should have something like this:

5. Turn the strap piece right-side-out. I use a safety pin - attach it to one side...

...tuck it inside...

...then 'scooch' it (technical term)...

...and pull to straighten.

Continue scooching and straightening until the safety pin comes out the other end.

Then just pull the rest through.

6. Press, and top-stitch on both long edges of the strap piece.

7. Take a bit of your round elastic and make a loop. It should be long enough to loop around your toggle, plus a little for seam allowance.

8. Turn one of the body pieces right-side out, and tack the loop in place as shown. Make sure to only sew through one side of the body fabric.

9. Repeat on the other side, with your toggle on this piece of elastic. I forgot to take a picture of this step, but you can see it in Step 11.

Now your body pieces should look like this: 

10. Pin one end of your strap to the right edge of the body piece as shown. Make sure to only pin through one layer of fabric.

11. Turn the body piece over, and keeping the strap smooth and untwisted, pin to the right side (one layer of fabric only). (Your toggle should be on this side, unlike mine.)

(Here's with the toggle.)

12. This is the trickiest part, but you can do it! Take the body piece with the strap, and - just as it is - stuff it inside the other body piece. They should be right sides together - so all you should be able to see is wrong sides. Match the side seams, and pin all around.

13. Carefully stitch all around the top, leaving a few inches for turning.  Make sure to keep the other side of the purse out of the way.  I chose to use 1/2" seam allowance here, just for extra peace of mind, but it doesn't really matter.

14. Before turning right-side-out, go ahead and trim off the excess of the elastic and strap ends.  Then find the gap we left:

Reach inside the gap, and pull out the insides, strap and all. It will look like this partway through:

And like this when your get it all out:

(Other side.)

 15. Press the body seams, then stick one side back in the other (see below) and press the top seam.

16. Top-stitch around the top. This will close up our turning hole, and also look nice.

Make sure you're only stitching through one side of the bag!

You're done!

This bag is very versatile. You can make it any size, any color/pattern, add a pocket, or change up the closure very easily. This would make a very cute water bottle holder.

Love and Purple,

Leah Joy

P.S. If you're wondering about my fabric choices, I let my toddler pick them. :)